Chords Bridge

From Infogalactic: the planetary knowledge core
(Redirected from Jerusalem Chords Bridge)
Jump to: navigation, search
Chords Bridge
גשר המיתרים
View of the bridge in 2008.
Coordinates Lua error in package.lua at line 80: module 'strict' not found.
Carries 2 tracks of Jerusalem Light Rail and 1 sidewalk
Crosses Shazar Street
Locale Jerusalem, Israel
Characteristics
Design Cantilever spar cable-stayed bridge
Material Steel, reinforced concrete
Total length 360 metres (1,180 ft)
Width 14.82 metres (48.6 ft)
Height 118 metres (387 ft)
Longest span 160 metres (520 ft)
Clearance below 3.71 metres (12.2 ft)
History
Architect Santiago Calatrava
Engineering design by Santiago Calatrava
Construction begin 2005
Construction end 2008
Construction cost NIS 246 million
Inaugurated June 25, 2008
References
[1][2]
Aerial view of the bridge at night.

The Chords Bridge (Hebrew: גשר המיתרים‎, Gesher HaMeitarim), also called the Bridge of Strings or Jerusalem Light Rail Bridge, is a cantilever spar cable-stayed bridge in Jerusalem, Israel. The structure was designed by the Spanish architect and engineer Santiago Calatrava and is used by Jerusalem Light Rail's Red Line, which began service on August 19, 2011. Incorporated in the bridge is a glass-sided pedestrian bridge enabling pedestrians to cross from Kiryat Moshe to the Jerusalem Central Bus Station. The bridge, which cost about $70 million (NIS 246 million), was inaugurated on June 25, 2008.[2]

History

Calatrava first visited Israel for the opening of an exhibition of his works in Haifa in 1997. During that visit, he was invited to design a pedestrian bridge in Petah Tikva, which was opened in 2005. He was invited to Jerusalem by city engineer Uri Shetrit and former mayor Ehud Olmert,[3] who, according to Calatrava, challenged him to "do the most beautiful contemporary bridge".[4]

Construction of the Chords Bridge began in 2005, with an estimated cost of NIS 129 million, far higher than the initial forecast of NIS 80 million.[5]

Design and symbolism

The bridge was designed to add a defining visual element to the Jerusalem "skyline" at the entrance to the city, and to carry a light rail system, expected to solve some of the city's traffic problems. For Calatrava the bridge is "also the excuse to create a major plaza, to give character and unity to this delicate place".[6]

Similar to Calatrava's Puente del Alamillo in Seville, Spain, the bridge makes use of an angled cantilever tower to absorb some of the load and reduce the number of cable stays needed. The bridge consists of a single pylon counterbalancing a 160-metre (170 yd) span with lengths of cables, making a dramatic architectural statement. While this is Calatrava's 40th bridge, it is the first he has designed to carry both train and pedestrian traffic.[7]

A striking feature of the bridge is a single 118-metre (129 yd) high mast supporting the roadway via 66 steel cables[8] arranged in a parabolic shape which develops three-dimensionally in space,[6] making it the tallest structure in Jerusalem at the time of its completion. The exterior of the bridge is mostly clad in Jerusalem stone, with steel, glass and concrete detailing. Dubbed "Jerusalem's first shrine of modern design" by Time Magazine,[7] the bridge has become a tourist attraction.

The form of the bridge resembles a tent in the desert or a harp, with the cables as the strings, symbolising King David's harp, according to Calatrava,[9] others interpret the looming pylon as the bust of a long-necked bird, a human arm or an arrow caught in a bow.[10]

Acceptance and criticism

The project was accepted with great controversy. Supporters, such as architectural historian David Kroyanker, said that the bridge helps developing western Jerusalem and its modern requirements.[11] Artist Jonathan Kis-Lev included the bridge in one of his paintings in a discreet way, most likely as a sign of acceptance.[12] Overall, however, the project has been criticized as an extravagant and costly solution to a problem that could have been solved by cheaper means,[8] the final cost of over $70 million exceeding the original budget more than twofold. The aesthetics of the bridge and its impact on Jerusalem have also sparked controversy.[13] Some say the bridge, situated at the city's crowded entrance, does not have enough space around it for people to appreciate its artistic merit, while others feel that the bridge is simply out of its element and question whether it fits visually in the city.[4] The bridge's dedication ceremony, a $500,000 extravaganza, also drew criticism, particularly as young female dancers, subsequently dubbed the "Taliban troupe",[14] were compelled to wear long skirts and cover their hair after ultra-Orthodox Jews threatened to disrupt the ceremony.[9]

See also

References

  1. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ 6.0 6.1 Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ 8.0 8.1 Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Chords_Bridge&oldid=688413312"