Inconel

Inconel 718 round bar

Inconel is a family of austenite nickel-chromium-based superalloys.

Inconel alloys are oxidation and corrosion resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.

Inconel alloys are typically used in high temperature applications. It is sometimes referred to in English as "Inco" (or occasionally the misspelling "Iconel"). Common trade names for Inconel Alloy 625 include: Inconel 625, Chronin 625, Altemp 625, Haynes 625, Nickelvac 625 and Nicrofer 6020.

History

The Inconel family of alloys was first developed in the 1940s by research teams at Wiggin Alloys (Hereford, England), which has since been acquired by SMC, in support of the development of the Whittle jet engine.

Composition

Different Inconels have widely varying compositions, but all are predominantly nickel, with chromium as the second element.

Inconel	Element (% by mass)
	Ni	Cr	Fe	Mo	Nb	Co	Mn	Cu	Al	Ti	Si	C	S	P	B
600	72.0	14.0-17.0	6.0-10.0				1.0	0.5			0.5	0.15	0.015
617	44.2-56.0	20.0-24.0	3.0	8.0-10.0		10.0-15.0	0.5	0.5	0.8-1.5	0.6	0.5	0.15	0.015	0.015	0.006
625	58.0	20.0-23.0	5.0	8.0-10.0	3.15-4.15	1.0	0.5		0.4	0.4	0.5	0.1	0.015	0.015
690	59.5	30	9.2				0.35	0.01	0.02		0.35	0.019	0.003
718	50.0-55.0	17.0-21.0	balance	2.8-3.3	4.75-5.5	1.0	0.35	0.2-0.8	0.65-1.15	0.3	0.35	0.08	0.015	0.015	0.006
X-750	70.0	14.0-17.0	5.0-9.0		0.7-1.2	1.0	1.0	0.5	0.4-1.0	2.25-2.75	0.5	0.08	0.01

Properties

Inconel alloys are oxidation- and corrosion-resistant materials well suited for service in extreme environments subjected to high pressure and kinetic energy. When heated, Inconel forms a thick and stable passivating oxide layer protecting the surface from further attack. Inconel retains strength over a wide temperature range, attractive for high-temperature applications where aluminium and steel would succumb to creep as a result of thermally induced crystal vacancies (see Arrhenius equation). Inconel's high temperature strength is developed by solid solution strengthening or precipitation strengthening, depending on the alloy. In age-hardening or precipitation-strengthening varieties, small amounts of niobium combine with nickel to form the intermetallic compound Ni₃Nb or gamma prime (γ'). Gamma prime forms small cubic crystals that inhibit slip and creep effectively at elevated temperatures. The formation of gamma-prime crystals increases over time, especially after three hours of a heat exposure of 850 °C, and continues to grow after 72 hours of exposure.

Machining

Inconel is a difficult metal to shape and machine using traditional techniques due to rapid work hardening. After the first machining pass, work hardening tends to plastically deform either the workpiece or the tool on subsequent passes. For this reason, age-hardened Inconels such as 718 are machined using an aggressive but slow cut with a hard tool, minimizing the number of passes required. Alternatively, the majority of the machining can be performed with the workpiece in a solutionized form, with only the final steps being performed after age hardening.

External threads are machined using a lathe to "single-point" the threads or by rolling the threads in the solution treated condition (for hardenable alloys) using a screw machine. Inconel 718 can also be roll-threaded after full aging by using induction heat to 1,300 °F (704 °C) without increasing the grain size. Holes with internal threads are made by threadmilling. Internal threads can also be formed using a sinker EDM (electrical discharge machining).

Cutting of a plate is often done with a waterjet cutter. New whisker-reinforced ceramic cutters are also used to machine nickel alloys. They remove material at a rate typically eight times faster than carbide cutters. Apart from these methods, Inconel parts can also be manufactured by selective laser melting.

Joining

Welding of some Inconel alloys (especially the gamma prime precipitation hardened family, e.g. Waspalloy and X-750) can be difficult due to cracking and microstructural segregation of alloying elements in the heat-affected zone. However, several alloys such as 625 and 718 have been designed to overcome these problems. The most common welding methods are gas tungsten arc welding and electron beam welding.

Innovations in pulsed micro laser welding have also become more popular in recent years for specific applications.

Uses

Inconel is often encountered in extreme environments. It is common in gas turbine blades, seals, and combustors, as well as turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, chemical processing and pressure vessels, heat exchanger tubing, steam generators and core components in nuclear pressurized water reactors, natural gas processing with contaminants such as H₂S and CO₂, firearm sound suppressor blast baffles, and Formula One, NASCAR and APR, LLC exhaust systems. It is also used in the turbo system of the 3rd generation Mazda RX7, and the exhaust systems of high powered rotary engined Norton motorcycles where exhaust temperatures reach more than 1,000 degrees C. Inconel is increasingly used in the boilers of waste incinerators. The Joint European Torus and DIII-D (fusion reactor) tokamaks vacuum vessels are made in Inconel. Inconel 718 is commonly used for cryogenic storage tanks, downhole shafts and wellhead parts.

Several applications of inconel in aerospace include:

• North American Aviation constructed the skin of the North American X-15 Rocket-powered aircraft out of an Inconel alloy known as "Inconel X".
• Rocketdyne used Inconel X-750 for the thrust chamber of the F-1 rocket engine used in the first stage of the Saturn V booster.
• SpaceX uses inconel in the engine manifold of their Merlin rocket engine which powers the Falcon 9 launch vehicle.
• In a first for 3D printing, the SpaceX SuperDraco rocket engine that provides launch escape system and propulsive-landing thrust for the Dragon V2 crew-carrying space capsule is fully printed. In particular, the engine combustion chamber is printed of Inconel using a process of direct metal laser sintering, and operates at very high temperature and a chamber pressure of 6,900 kilopascals (1,000 psi).

Tesla Motors is now using Inconel, in place of steel, to upgrade the main battery pack contactor in its Model S so that it remains springy under the heat of heavy current. Tesla claims that this allows upgraded vehicles to safely increase the maximum pack output from 1300 to 1500 amps, allowing for an increase in power output (acceleration) Tesla refers to as "Ludicrous Mode."

Rolled Inconel was frequently used as the recording medium by engraving in black box recorders on aircraft.

Alternatives to the use of Inconel in chemical applications such as scrubbers, columns, reactors, and pipes are Hastelloy, perfluoroalkoxy (PFA) lined carbon steel or fiber reinforced plastic.

The exhaust valves on NHRA Top Fuel and Funny Car drag racing engines are made of Inconel. Inconel is also used in the manufacture of exhaust valves in high performance aftermarket turbo and Supercharged Mazda Miata engine builds (see Flying Miata INC).

Inconel alloys

Alloys of inconel include:

• Inconel 600: Solid solution strengthened
• Inconel 625: Acid resistant, good weldability. The LCF version is typically used in bellows.
• Inconel 690: Low cobalt content for nuclear applications, and low resistivity
• Inconel 713C: Precipitaion hardenable nickel-chromium base cast alloy
• Inconel 718: Gamma double prime strengthened with good weldability
• Inconel 751: Increased aluminium content for improved rupture strength in the 1600 °F range
• Inconel 792: Increased aluminium content for improved high temperature corrosion properties, used especially in gas turbines
• Inconel 939: Gamma prime strengthened to increase weldability

In age hardening or precipitation strengthening varieties, alloying additions of aluminum and titanium combine with nickel to form the intermetallic compound Ni3(Ti,Al) or gamma prime (γ’). Gamma prime forms small cubic crystals that inhibit slip and creep effectively at elevated temperatures.

See also

• Incoloy
• Monel
• Hastelloy
• Nimonic
• Stellite