One Port Center

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
One Port Center
File:One Port Center (Camden) 02.jpg
General information
Type Commercial
Location 2 Riverside Drive
Camden, New Jersey, US 08101
Completed 1996
Cost $30 million
Height
Roof 41 m (135 ft)
Technical details
Floor count 11
Floor area 175,000 sq ft (16,300 m2)
Design and construction
Architect Michael Graves
References
[1][2][3][4]

One Port Center is a office building in Camden, New Jersey located in the Waterfront entertainment district. The building, opened in 1996, was designed by Michael Graves and is headquarters to the Delaware River Port Authority.[1] The building is situated on a L-shaped site flanks an existing parking garage, the other of which side is a planned future companion building. The location offers panoramic views of the Delaware River and Philadelphia. The eleven-story, 176,000-square-foot building accommodates retail shops and a restaurant at the ground floor. There are four floors of leased office space and six floors of offices for the Port Authority. The executive offices and boardroom are located on the top floor behind three-story yellow aluminum composite columns. The blue and white glazed brick used at the lower speaks to the waterfront location.[5][6]

File:Wiggins Park Marina 1 Port Ctr (Camden).JPG
As seen from Wiggins Park Marina

See also

References

Lua error in package.lua at line 80: module 'strict' not found.

<templatestyles src="Reflist/styles.css" />

Cite error: Invalid <references> tag; parameter "group" is allowed only.

Use <references />, or <references group="..." />
  1. 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.