Ruger Blackhawk

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Ruger Blackhawk
300px
A .357 Magnum/9mm convertible Ruger Blackhawk in blued finish, with Adjustable Sights, and a 4 5/8" Barrel
Type Revolver
Place of origin United States
Production history
Manufacturer Sturm, Ruger
Unit cost US:$495 – Standard Model, Blued Finish [1] US:$525 – Stainless New Model Vaquero
Produced 1955–Present
Specifications
Weight 36–48 oz (1,021–1,361 g)
Length 10 1/4–13 1/2 inches (260–343 mm)
Barrel length 4 5/8–7 1/2 inches (117–191 mm)
Cartridge Varies, see Calibers
Action Single-action revolver
Feed system 6-round cylinder

The Ruger Blackhawk is a 6-shot, single-action revolver manufactured by Ruger. It is produced in a variety of finishes, calibers, and barrel lengths.

History

In the early 1950s, Westerns were popular in movies and television. Colt had discontinued the iconic Single Action Army prior to World War II, and few single-action revolvers were available to meet market demand for cowboy-style revolvers. In 1953, the new firm of Sturm, Ruger & Company introduced the Single-Six, a .22 LR rimfire single-action revolver. The Single-Six proved to be a popular seller, leading Ruger to develop and market a centerfire revolver similar to the Single Action Army: the Ruger Blackhawk.[2][3]

Ruger introduced the Blackhawk in 1955. Chambered for the .357 Magnum, the Blackhawk was a simple and strong design, and it sold well. In 1956, as Smith & Wesson was introducing the new .44 Magnum, Ruger quickly developed a variant of the Blackhawk in the new cartridge. Ruger achieved wide popularity with this firearm in a hotly anticipated new cartridge, which was both cheaper and more readily available than the Smith & Wesson Model 29 revolver. According to popular legend, Ruger was able to field a .44 Magnum revolver at nearly the same time as Smith & Wesson due to a Ruger employee finding expended .44 Magnum cartridge cases at a scrapyard and deducing that Smith & Wesson was about to launch a new cartridge.[4][5]

The 1955–1962 Blackhawks are known today as the "Flattop" models, because their adjustable rear sights were not protected by "ears" extending up from the frame as later became standard. From 1962 through 1972, Ruger made the "Three Screw" Blackhawk in various calibers, so called by the number of screws visible on the side of the revolver.

The Flattop and Three Screw Rugers were modernized compared to the Colt Single Action Army, in that they had adjustable sights instead of the Colt's fixed sights, and they used wire coil springs instead of the Colt's flat leaf springs. Bill Ruger chose coil springs due to their greater durability, saying that it solved one of the primary weaknesses of the Colt design.

The early models of the Blackhawk still operated the same way as the Colt, in that the hammer was half-cocked to load and unload and that the firearm was not safe to carry with all six chambers loaded due to the hammer resting upon the sixth chamber.[6] In 1973, in order to eliminate accidents occurring from the hammer jarring against a round loaded in the sixth chamber, Ruger introduced the New Model Blackhawk. The New Model Blackhawk did not require the hammer to be half-cocked for loading and unloading, and it employed a transfer bar mechanism which prevented the cartridge under the hammer from being fired without the trigger being pulled. The New Blackhawk was seen as limiting firearms accidents and legal liability. Ruger then began offering a retrofit program, offering free transfer bar conversions to earlier variants of the Blackhawk.

Various models

File:Rugeromsbhbox.jpg
Ruger Old Model Super Blackhawk
File:Sbhjavmont.jpg
Ruger New Model Super Blackhawk and Javalina
File:Oldarmy.jpg
The Ruger Old Army is a 45-caliber percussion revolver based on the Ruger Blackhawk action.
File:APG custom blackhawk 2003.jpg
The Blackhawk is a popular base gun for custom work. This one is a cooperative effort by members of the American Pistolsmith's Guild

Over the years the Blackhawk has appeared in a wide variety of models. These models include:

  • New Model Blackhawk: Produced in blued steel in .30 Carbine, .357 Magnum, .41 Remington Magnum, .44 Special, and .45 Colt; produced in stainless in .327 Federal Magnum with an 8-round cylinder, .357 Magnum, and .45 Colt. Multiple barrel lengths were offered in many of these configurations.
  • New Model Blackhawk Convertible: The cylinder of a Blackhawk is easily removed, and can be replaced with a cylinder for a different cartridge of the same diameter. Ruger has offered "convertible" cylinder revolvers in .45 ACP/.45 Colt, .38-40/.40 S&W/10mm Auto, and .357 Magnum/9×19mm Parabellum. Other than being sold with multiple cylinders, these firearms are identical to the Blackhawk.
  • New Model Super Blackhawk: Produced in blued and stainless, with or without a rib for mounting a scope. The Super Blackhawk is built on the same frame, but with a larger grip (in the 7.5" and 10.5" barrels) and unfluted cylinder (except for the 5.5" barrel), in order to more effectively deal with the .44 Magnum's recoil. Also, the ejector rod housings and grip frames are made of steel, versus aluminium for those same components in the Blackhawk.
  • Vaquero and New Vaquero: With the popularity of Cowboy Action Shooting came demand for a single-action revolver that was more traditional in appearance. As the standard Ruger Blackhawk departs from the Single Action Army looks due to its adjustable sights, Ruger offered a fixed-sight equivalent to cater to buyers wanting a more traditional appearance. In all other ways, the Vaquero was identical to the Blackhawk, though offered in slightly fewer variants. The original Vaquero was offered in .357 Magnum, .44 Magnum, and .45 Colt. After some time, Ruger went with a smaller frame to more closely resemble the actual size of the Colt SAA, changed the name to the New Vaquero, and dropped the powerful .44 Magnum from the lineup. While keeping the smaller size, Ruger later went back to the simple Vaquero name.
  • Bisley: The Bisley grip is a type of angled grip developed by Colt for target shooting at the end of the 19th Century. Ruger's "Bisley" offerings incorporated a Bisley-style grip, hammer spur, and trigger.
  • Old Army: The Old Army is a percussion ("cap and ball") black powder revolver based on the Blackhawk frame.

Calibers

Finishes

See also

References

  1. ↑ Ruger product info
  2. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  4. ↑ Sturm Ruger booklet "Fifty Years of .44 Magnums"
  5. ↑ Sixguns.com
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.

External links

Retrieved from "https://infogalactic.com/w/index.php?title=Ruger_Blackhawk&oldid=4225575"