Spiral of Theodorus

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
The spiral of Theodorus up to the triangle with a hypotenuse of √17

In geometry, the spiral of Theodorus (also called square root spiral, Einstein spiral or Pythagorean spiral)[1] is a spiral composed of contiguous right triangles. It was first constructed by Theodorus of Cyrene.

Construction

The spiral is started with an isosceles right triangle, with each leg having unit length. Another right triangle is formed, an automedian right triangle with one leg being the hypotenuse of the prior triangle (with length √2) and the other leg having length of 1; the length of the hypotenuse of this second triangle is √3. The process then repeats; the i th triangle in the sequence is a right triangle with side lengths √i and 1, and with hypotenuse i + 1. For example, the 16th triangle has sides measuring 4 (=16), 1 and hypotenuse of 17.

History and uses

Although all of Theodorus' work has been lost, Plato put Theodorus into his dialogue Theaetetus, which tells of his work. It is assumed that Theodorus had proved that all of the square roots of non-square integers from 3 to 17 are irrational by means of the Spiral of Theodorus.[2]

Plato does not attribute the irrationality of the square root of 2 to Theodorus, because it was well known before him. Theodorus and Theaetetus split the rational numbers and irrational numbers into different categories.[3]

Hypotenuse

Each of the triangles' hypotenuses hi gives the square root of the corresponding natural number, with h1 = √2.

Plato, tutored by Theodorus, questioned why Theodorus stopped at √17. The reason is commonly believed to be that the √17 hypotenuse belongs to the last triangle that does not overlap the figure.[4]

Overlapping

In 1958, Erich Teuffel proved that no two hypotenuses will ever coincide, regardless of how far the spiral is continued. Also, if the sides of unit length are extended into a line, they will never pass through any of the other vertices of the total figure.[4][5]

Extension

File:Spiral of Theodorus extended.svg
Colored extended spiral of Theodorus with 110 triangles

Theodorus stopped his spiral at the triangle with a hypotenuse of √17. If the spiral is continued to infinitely many triangles, many more interesting characteristics are found.

Growth rate

Angle

If φn is the angle of the nth triangle (or spiral segment), then:

\tan\left(\varphi_n\right)=\frac{1}{\sqrt{n}}.

Therefore, the growth of the angle φn of the next triangle n is:[1]

\varphi_n=\arctan\left(\frac{1}{\sqrt{n}}\right).

The sum of the angles of the first k triangles is called the total angle φ(k) for the kth triangle. It grows proportionally to the square root of k, with a bounded correction term c2:[1]

\varphi\left (k\right)=\sum_{n=1}^k\varphi_n = 2\sqrt{k}+c_2(k)

where

\lim_{k \to \infty} c_2(k)= - 2.157782996659\ldots.
File:Spiral of Theodorus triangle.svg
A triangle or section of spiral

Radius

The growth of the radius of the spiral at a certain triangle n is

\Delta r=\sqrt{n+1}-\sqrt{n}.

Archimedean spiral

The Spiral of Theodorus approximates the Archimedean spiral.[1] Just as the distance between two windings of the Archimedean spiral equals mathematical constant pi, as the number of spins of the spiral of Theodorus approaches infinity, the distance between two consecutive windings quickly approaches π.[6]

The following is a table showing of two windings of the spiral approaching pi:

Winding No.: Calculated average winding-distance Accuracy of average winding-distance in comparison to π
2 3.1592037 99.44255%
3 3.1443455 99.91245%
4 3.14428 99.91453%
5 3.142395 99.97447%
→ π → 100%

As shown, after only the fifth winding, the distance is a 99.97% accurate approximation to π.[1]

Continuous curve

The question of how to interpolate the discrete points of the spiral of Theodorus by a smooth curve was proposed and answered in (Davis 1993, pp. 37–38) by analogy with Euler's formula for the gamma function as an interpolant for the factorial function. Davis found the function

T(x) = \prod_{k=1}^\infty \frac{1 + i/\sqrt{k}}{1 + i/\sqrt{x+k}} \qquad ( -1 < x < \infty )

which was further studied by his student Leader[7] and by Iserles (in an appendix to (Davis 1993) ). An axiomatic characterization of this function is given in (Gronau 2004) as the unique function that satisfies the functional equation

f(x+1) = \left( 1 + \frac{i}{\sqrt{x+1} }\right) \cdot f(x),

the initial condition f(0) = 1, and monotonicity in both argument and modulus; alternative conditions and weakenings are also studied therein. An alternative derivation is given in (Heuvers, Moak & Boursaw 2000).

Some have suggested a different interpolant which connects the spiral and an alternative inner spiral, as in (Waldvogel 2009).

See also

References

  1. 1.0 1.1 1.2 1.3 1.4 . Also, this was used to visualize certain things in nature Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
  5. Erich Teuffel, Eine Eigenschaft der Quadratwurzelschnecke, Math.-Phys. Semesterber. 6 (1958), pp. 148-152.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Leader, J.J. The Generalized Theodorus Iteration (dissertation), 1990, Brown University

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.